Winegard trav'ler question
In 2009 I installed the Trav'ler on my 2010 Sabre. There was an optional cable that could be purchased that would allow it to be setup to automatically stow itself, if you forgot to do it. The cable...
Forum Discussion
The book says "Red wire is connected to a source that has no VDC. When it gets 12 VDC it will stow the dish.Caution: While the 12 VDC remains, the dish will not deploy.The brown wire should have 12 VDC, when the voltage goes to 0 VDC the dish will stow. If the12 VDC does not return, the unit will not deploy again. Also, it is not required to use the brownwire, meaning if it has 0 VDC all the time, it is inactive.Orange wire is not used at this time; please do not connect the orange wire to any circuit"
