Winegaurd batwing ant. and power wall plate
Looking for some sort of wire diagram or if someone knows what goes where. My wall power outlet only has two coaxial connectors on the back and one in the front with the 12v socket. Every diagram I fo...
Forum Discussion
mike brez wrote:
Looking for some sort of wire diagram or if someone knows what goes where. My wall power outlet only has two coaxial connectors on the back and one in the front with the 12v socket. Every diagram I found has three connections on back and one on the front. I have the wire coming down from ant. and put it on input and checked on the roof at ant. and it has 12v. Now I'm lost.
There are three different configurations of the Winegard switch assembly.
Version 1:
Two connectors on back
No connector for cable.
One connector for Batwing.
Second connector on back is for second TV set.
Version 2:
Two connectors on back.
One connector for cable.
One connector for Batwing.
No connector for second TV set.
Version 3:
Three connectors on back.
One connector for cable.
One connector for Batwing.
Third connector is for second TV set.
