X2 wineguard 6000 series question
I have the sat antenna and set up with two receivers on west arch both 211Z systems and one with a cheap hard drive to record system for most part works very well lately I have been losing signal o...
Forum Discussion
Set use the first set as the recording unit. Glad I could help!
The recording unit actually should be the primary receiver and the other should be secondary. This will likely solve your problem since that's the only receiver that is going to try to automatically change channels and the other can just follow along. Just swap receiver locations or swap the cables on the X2 to ensure that the recording receiver is connected to the main output on the X2.
The recording unit actually should be the primary receiver and the other should be secondary. This will likely solve your problem since that's the only receiver that is going to try to automatically change channels and the other can just follow along. Just swap receiver locations or swap the cables on the X2 to ensure that the recording receiver is connected to the main output on the X2.
