Newbie first trip this weekend
Hi everyone! We purchased our first RV last week, a Class C 2006 Dutchmen Kodiak with the Duramax/Alison drive train. We are going on our first weekend trip starting today. After reading posts on t...
Forum Discussion
Ok, I know everyone is dying to hear an update to the issues.... ;) I replaced the board for the fridge and tested it. I no longer get the "A" error code.
I also replaced the LP 2-stage regulator with no success in finding the LP pressure issue. However, I did notice that the T fitting wasn't allowing gas to flow to an accessory either, and that fitting was prior to the regulator. I decided to take the fittings apart again and blow compressed air into the T fitting to ensure air was passing through properly. Everything checked out so I reassembled the fittings and tried everything again, and presto, all LP appliances started working with proper pressure. No flame fades, everything staying lit for several minutes with all appliances on at the same time. For kicks and grins, I tried everything again this morning and they still worked. I plan on getting an extra T fitting to keep on the rig just in case I have this issue again. I am also keeping the regulator I took off for the same purpose.
Has anyone had this happen to them, where a T fitting was stuck or the gas pressure just started working again?
I also replaced the LP 2-stage regulator with no success in finding the LP pressure issue. However, I did notice that the T fitting wasn't allowing gas to flow to an accessory either, and that fitting was prior to the regulator. I decided to take the fittings apart again and blow compressed air into the T fitting to ensure air was passing through properly. Everything checked out so I reassembled the fittings and tried everything again, and presto, all LP appliances started working with proper pressure. No flame fades, everything staying lit for several minutes with all appliances on at the same time. For kicks and grins, I tried everything again this morning and they still worked. I plan on getting an extra T fitting to keep on the rig just in case I have this issue again. I am also keeping the regulator I took off for the same purpose.
Has anyone had this happen to them, where a T fitting was stuck or the gas pressure just started working again?
