Forum Discussion
Allworth
May 16, 2015Explorer II
I installed one of the 56" light strips designed to go below the tailgate of a full size pickup just below the rear window on my Titanium.
Ran the wire into the void space between the inside wall and the rear cap and then fished it to the driver's side taillight opening. All the wires were there to use suitcase connectors to hook up Right Turn, Left Turn, and Ground. That gives me a bright LED stop light/turn signal set where even drivers not paying attention can see it.
I also installed an extra set of amber marker lights on each side, on the wheel skirts between the trailer wheels and wired them to the turn signals so the fool creeping up beside the trailer has warning that I am about to change lanes.
Ran the wire into the void space between the inside wall and the rear cap and then fished it to the driver's side taillight opening. All the wires were there to use suitcase connectors to hook up Right Turn, Left Turn, and Ground. That gives me a bright LED stop light/turn signal set where even drivers not paying attention can see it.
I also installed an extra set of amber marker lights on each side, on the wheel skirts between the trailer wheels and wired them to the turn signals so the fool creeping up beside the trailer has warning that I am about to change lanes.
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,138 PostsLatest Activity: Jun 07, 2025