Deano_1 wrote:
I am still having a problem. Now they say the chord is not faulty but they gave us the the "Correct" wiring instructions.
Here is what they told me straight from the Manufacturer.
White ground
Blue Electric Brakes
Green-Right/Stop/Turn
Black Battery Charge
Red-Backup-(Don't use)
Brown Tail
Yellow-Left/Stop/Turn
So from the Camper to the TV I have
White-White
Blue-Blue (There is a also blue/white wire from the camper I connected otherwise the brakes/Controller didn't work.)
Green-Brown
Brown-Green
Yellow-Red
Black-Battery/Charge
Red-Don't Use
There is a green/White stripped wire that I don't know where is goes.
I have brakes,left and right turn, rear marker lights but no front marker lights and a very pissed off wife.
Any suggestions? I hate to drive it anywhere but I know I must be missing something.
Thanks,
OK, I've read and re-read everything in the thread and still cannot follow what you are saying here. You originally had the marker/tail lights flashing when you turned on the right turn signal, correct? That's consistent with the green-brown connections you list.
Did both front and back marker lights flash when you did that? They are usually all connected to a single wire. Are you sure what you are seeing is marker (as in along the sides and not just the rear-facing tail/stop lights)?
What did you change between the original problem you had and now? With the color connections you listed it sure seems like you've got some swapped. Most trailers use yellow/green/brown as left/right/tail like the cord manufacturer said they use. Did you confirm each wire on the trailer with a known power source like a battery to see what lights up?
I'm concerned when you say the trailer has blue/white and green/white wires, one of which you just "connected" or the brakes didn't work. Where did you unhook them from the original cord?