Adding a washer to my Equalizer
Hey folks, I am not fond of the setup of my Equalizer brandh WDH from the dealer. The bars are nowhere near parallel, in fact they are probably 3" or moer out. According to my recent trip to the CA...
Forum Discussion
I had a similar problem a year ago with our new TT and 10K Equalizer hitch. Dealer was afraid to add washers for some reason and would only adjust it by moving the shank and L brackets. After a few trips I took it all apart and got the bars level with descent load transfer.
However, since this is such an important part of the rig I want to know it is right. Look on the Equalizer website at the list of dealers and notice the ones that have FACTORY TRAINED technicians have a notation in the list.
I'm 400 miles away from the nearest factory-trained tech, but have cut a deal with one in Oklahoma to review/adjust my setup as we go thru there on our way out west in May.
Might be worth your time and peace of mind to find a factory-trained technician nearby that knows how to set it up.
However, since this is such an important part of the rig I want to know it is right. Look on the Equalizer website at the list of dealers and notice the ones that have FACTORY TRAINED technicians have a notation in the list.
I'm 400 miles away from the nearest factory-trained tech, but have cut a deal with one in Oklahoma to review/adjust my setup as we go thru there on our way out west in May.
Might be worth your time and peace of mind to find a factory-trained technician nearby that knows how to set it up.
