Andersen Trailer Jack Block

Lynnmor wrote:
Tongue jacks nearly always have just the flange locating it. The jack will wobble when you push side to side and that bucket will do nothing. If you locate the tongue with a plate, in a way that stops the movement, the trailer will then be "pinned" in place.

I did the same thing ...



'Though in my case for a different reason - I replaced the original LCI jack with a 2.25" lower shaft with an UltraFab that has a 2" lower shaft. To prevent wobble I bolted in this plate and made the tolerances so exact that the tongue jack is really stable. :B