SoundGuy wrote:
FF286 wrote:
Being plastic there is the possibility of them breaking, I have broken my LEGO blocks in the past.
Plastic leveling blocks only break when sitting on an uneven ground surface which can cause part of any given block(s) to be unsupported. This can be avoided entirely by mounting the initial layer of plastic leveling blocks on a solid surface. Years ago I wrote to TriLynx suggesting that aside from individual Lynx Levelers they offer pre-manufactured bases in 5, 6, 7, 8 Lynx lengths, bases strong enough to eliminate cracking as an issue. Of course my suggestion was ignored so I did the next best thing and built my own using 3/4" plywood as a base. That was years ago and I've been using this system ever since, haven't had any breakage or slippage issues since. :B
So that bottom layer of legos is screwed to the plywood?
I have one of the Anderson wedge levelers. It works great, going to get another, I especially like it because it doesn't slide when its slippery. We dry camp a lot in the desert so leveling can be a hassle and I carry quite a few blocks. But we also can dig holes and the new rig has auto leveling so just need to "get close".
