rockhillmanor wrote:
Digital signal is very narrow unlike the old analog. You can't just get in and spin the antenna and have an array of all the channels. You have to inch it to get the channels. AND you have to 'scan' the channels each time you change the direction.
AND it is very sensitive to trees. Make that it can't receive the signal if tree limbs are in the way.:(
I had to change my way of choosing a CG site when the TV's went digital. You need a clean shot to the sky with digital.
UHF is more sensitive than VHF. It has nothing to do with digital vs analog. It is more sensitive to pointing but nowhere near "inching". You're scaring them off.. :)
OP: START by looking for +12v on the red lead feeding the connector plate. If there is no 12v, nothing will work.