B&W And 2015 Chevrolet 3500 ISSUES
I have had my turnover ball installed by a dealer. I purchased the companion slider to go with it as well. There seems to be a problem whereas the companion at the rear toward the tailgate. The compan...
Forum Discussion
Spoke to B&W and verified that there is a hump in the bed of the 2015 Chevrolet 3500.
B&W suggested to sand out the hump in the supplied pads, at the base of the companion. Pads not shown here.
GM has told B&W that there bed is completely flat. I can say that with a Straight edge it is not.
I doubled checked everything in the installation and it is correct for the exception of the pads not being flipped to the flat side. I check all of the bolt torque specs to find that the were all within specs.
So with all this said, Tonight I'm going to take my belt sander and sand out the hump in the pads to compensate the hump in the bed.
I will post pictures of this as I get it done.
B&W said that they may compensate me for the damages, we'll see how that goes.
B&W suggested to sand out the hump in the supplied pads, at the base of the companion. Pads not shown here.
GM has told B&W that there bed is completely flat. I can say that with a Straight edge it is not.
I doubled checked everything in the installation and it is correct for the exception of the pads not being flipped to the flat side. I check all of the bolt torque specs to find that the were all within specs.
So with all this said, Tonight I'm going to take my belt sander and sand out the hump in the pads to compensate the hump in the bed.
I will post pictures of this as I get it done.
B&W said that they may compensate me for the damages, we'll see how that goes.
Moderator edit to re-size pictures to forum recommended limit of 640px maximum width.
