Crack Down on 50 Amp Rigs Using 30 Amp Sites
I don't know how long this has been going on but I learned today that some RV parks including the Washington/Pittsbugh KOA I had booked has a policy that if your rig has 50 amp service, you can't use ...
Forum Discussion
SoundGuy wrote:I'm also not aware of an EMS that is settable to the amps desired, but may exist.MrWizard wrote:
the truth is fact
a 50a RV with EMS, will manage loads to the set limit of the EMS
how many 50a rv owners are going to set that limit below 20amps
15? 18?
What "truth"? :@ I can't say for built in, factory installed EMS because I've never owned one but units such as those offered by Progressive or TRC offer no way to adjust any current limit ... so what are you talking about? :h
A common load shedding EMS detects 50A and gen and doesn't shed. For 20A and 30A it defaults to 30A. The owner and then manually select 20A and it will shed accordingly. ie Electrically there is no way to detect 20A vs 30A.
A settable high amp charger is common to limit the AC draw since a 100A charger can draw 11A AC.
