my issue is, if i put a full size leveler at my front wheel, if i drive over it, it presses directly into the rear wheel. if i attempt to use a full size leveler for the rear wheel it won't even fit between the wheels to get it started.
this past weekend, i put a leveler at my front tire, and was going to just back off of it, however since the rear of my tire was chocked, on the opposite side, the camper was essentially stuck.
i was finally able to pull forward just enough to free it, but by chance you pull to far forward, you get the leveler wedged under the front tire, and pressing very deeply into the rear. trust me i know from experience. it's not a pretty site, and you could essentially just be stuck.