Dual Cam Setup
I'm working on setting up a new Reese Dual Cam setup. I think I need a 1" extended ball, and wonder if I would benefit from a 2". Here's are some photos of where I'm at now: Side view, I think...
Forum Discussion
TUCQUALA wrote:
I was noticing on mine that when I put them on temporarily, they both seemed to want to just fall down, no over center at all. One moves easily, the other is a bit stiffer. BUT, the older style that I have used for years, have a very definite over center so the chains are only pulling down. I also wonder how much force is applied to that pin. I find it hard to believe that it would be able to hold up to a huge amount of side force.
I know what you are talking about. Ideally, with the snap up, you can feel it go up (you have to push hard) and then you can feel when you at the "top (you don't have to push hard, but it hasn't snapped down yet) and then once you get "over" the top you fell it firmly pull back down (the "snap"). I've had a number of times where it got to the top but it never really snapped down.
TUCQUALA wrote:
I also wonder how much force is applied to that pin.
I bent one pretty good when my frame got messed up.
Also, the other one seem to have gotten a littler harder to get in. I just realized now that it could be slightly bent vs me just getting worse at putting it in.
