Dual Cam Setup
I'm working on setting up a new Reese Dual Cam setup. I think I need a 1" extended ball, and wonder if I would benefit from a 2". Here's are some photos of where I'm at now: Side view, I think...
Forum Discussion
mrekim wrote:
Here are some measurements with the 800 lb bars and no dual cam. The setup wasn't ideal (tt not level side to side, tow rig not perfectly straight) and I only measured from one side of the tow vehicle. Hopefully it will provide some help as to amt of WD the bars were providing.
.............Front
No TT.........38
No WD.........38.4375
WD............38.125
NoWD-NoTT......0.4375
WD-NoTT........0.125
WD-NoWD.......-0.3125
...........Rear
No TT......39
No WD......37.5625
WD.........38.125
NoWD-NoTT..-1.4375
WD-NoTT....-0.875
WD-NoWD.....0.5625
I'll study these some more and report back. Gee, you where using 800# WD bars and you moved this much weight? Did the back of the EX and the front of the camper have a lot less load in it than the day the frame bent with the 1,200# bars? Maybe you took some stuff out until you got the setup corrected?
