Dual Cam Setup
I'm working on setting up a new Reese Dual Cam setup. I think I need a 1" extended ball, and wonder if I would benefit from a 2". Here's are some photos of where I'm at now: Side view, I think...
Forum Discussion
JBarca wrote:
Since you now have 2 complete DC kits from different revisions, If you lay just the cam arm and the black yoke on top of each other, no frame plate, are the arms/yokes different? Meaning one has an offset more than the other?
I can't do that. I snapped a bunch of photos last night when boxing up the old one to send back to Reese. They wanted to inspect the dual cam parts and snap ups to see what stresses they may have seen. I could not notice an offset difference, the new one seemed a tiny bit thicker in the arm and the collar.
Do these help:
JBarca wrote:
You also seem to have both the older snap up brackets and the new HD snap ups with the added gusset. If you look at the end view of them on the TT frame, does it appear the new HD bracket has the chain hook point where the chain will hang plumb closer to the A frame on the new HD bracket than the older style?
I put the old and HD snap ups next to each other. The seem to be the same except for the gusset.
