Forum Discussion
CHD_Dad
Mar 14, 2015Explorer
charles_cincy wrote:CHD Dad wrote:
No, shank only works in the down position since it's all cast as one piece.
Page 5 of the installation manual says: "NOTE: To obtain proper ball height on low ground clearance tow vehicles, shank may be oriented in
the “UP POSTION” as shown in Illustration 4. If shank is used in the “DOWN POSITION, check shankfor adequate ground clearance. Accessory shanks with greater height and length are available from your dealer. IMPORTANT! Proper adjustment requires the use of the proper length shank; proper head height and proper head tilt adjustment."
Manual PDF
The Blue Ox shank is one piece. You linked to the Husky. This a thread about the Blue Ox...
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,108 PostsLatest Activity: Feb 08, 2025