Heat Issue
Our last trip out our heat failed to work. The fan would come on but it sounds like the gas is not igniting. The fan runs for a period and shuts off. I pulled the access panel and I can see a light fl...
Forum Discussion
Old-Biscuit wrote:
Atwood Furnace Error Codes
Fault LED Indication
Internal Circuit Board fault Steady on, no flashing
Limit switch/Airflow problems 1 flash with 3-second pause
Flame Sense fault 2 flashes with 3-second pause
Ignition Lockout Fault 3 flashes with 3-second pause
What error code do you have?
I will have to check again this weekend but I think it is a series of 3 flashes.
Where is the best place to order a Dino board from??
