Hooking up lights for a tandem double tow
I have an 18ft trailer that has a full hitch set up on the back (yes, its all properly welded/bolted to the frame and a "real" bumper) and I am going to double tow a small 8ft utility trailer with my ...
Forum Discussion
Bedlam wrote:
The hinge pin can be pushed out of the dust covers to remove them. To keep the connector clean when not in use, use a dummy plug in the 4-pin side.
^This or make/buy a splitter with a long whip to the rear trailer.
Or if accessible and you're going to be doing this many times, tap into the rear lights in the front trailer and make a dedicated plug on it for the tandem.
