hot water heater
2009 big country. Hot water has quit lighting on propane had to go to electric. You don't hear it try to light when you turn it the switch on like you did before. I took the pipe off and cleaned it di...
Forum Discussion
OP.........
Saw your 'other' posts in Forum Tech & Tech Support where in title you mentioned Atwood.
That and your rig being a 2009 model help.
You can rule out following because they are used for both electric and propane
DC Voltage
Circuit Board
Thermal Cutout
T-stats
No spark is typically an issue with the spark electrode
Bad connections, loose connection, wrong gap (S/B 1/8"), crack ceramic, dirty electrode
Saw your 'other' posts in Forum Tech & Tech Support where in title you mentioned Atwood.
That and your rig being a 2009 model help.
You can rule out following because they are used for both electric and propane
DC Voltage
Circuit Board
Thermal Cutout
T-stats
No spark is typically an issue with the spark electrode
Bad connections, loose connection, wrong gap (S/B 1/8"), crack ceramic, dirty electrode
