Artum Snowbird wrote:
I would say you should take careful measurements and make a layout chart of your camper floor. Ideally, you ensure that when you lay the flooring down, there is no place where there is a tiny bit of flooring next to a large piece.
So, when you start laying the floor, you might start with a cutoff piece, so when you get into the traffic areas of your camper, you have no narrow pieces.
And, sometimes laying the last few pieces can be difficult, so it that is someplace where it won't be seen, start at the other end.
What he said. Figure out what you're going to do and how it will end before you begin.