BurbMan wrote:
I have never used the Anderson levelers, but I guess they could be used on a board. So if you put 2 2x8's on each side that would give you 3" of height, then use the Anderson under one side to to level side to side....I guess.
Most unlevel site I have ever had
Good idea to bring a step stool....I had to borrow the cinder blocks in this pic from the CG.
Looks like the cinder blocks worked for you under the stabilizers.
For others contemplating cinder blocks it's best not to lay them on their side. They are less apt to break if set upright (holes looking from top to bottom). I'd never use loose stacked cinder block under a tongue jack either. BurbMan is using proper cribbing in his picture above.