Grit dog wrote:
lawnspecialties wrote:
blt2ski wrote:
I got 5-6 yrs typically running LT215-85-16 or 225-75-16 hauling a 765 bobcat, and tbo15 trackhoe on the same trailer doing landscape work. Typically 10,500 on axles, 1500-1700 hw. I usually ran cooper highway tires. Usually rotted in some shape or form before out of tread.
I choose not to skimp on tires too much in the 35 yrs before semi retiring 5 yrs ago. I did find coopers generally speaking a good bang for buck tire all around.
Marty
Coopers have been my favorite truck tire for years now. Both my F350s have a set. Never tried them on the trailers.
That would make no sense since Cooper doesn't make trailer tires that I've ever seen and a 235-85-16 LT tire would be a significant downgrade on capacity compared to the multitude of ST tire options in load range E, F and G, same size tire.
Hate doing long quotes...BUT.....
An option that might be better, would be 17.5 or 19.5" tires in a 225 width. These are more medium duty tires. A 225&70-19.5 is the same 31.5" as a 235-80-16. But at 3500 - 4000 lbs per tire with an all steel casing, should handle the issues with a dump trailer better than an ST or LT tire.
One thing many of us forget about dump anything's, is the rear most tire(s) get very loaded as your dumping. I've blown out a few tires on a 3599 and my IHC dump flatbeds. I may be ok with the bed down on rear tire capacity. But at 150% as one starts to dump etc as the bed goes up.
Same with my equipment trailer to a degree. As you load it, and in my case, the 6500 lb bobcat is on the rear of trailer, you have many more lbs than my tires 5500 lb capacity can handle. Granted my ramps have built in blocks so the rear doesn't go to the ground. They still can take a beating. Along with those are usually doing the dragging around corners, backing, Jack knifing etc.
A couple points to think about.
On my trailer I went from 15 - 16" and got better miles, years per tire. My single axle mowing trailers did fine with 15" ST tires with approx 2000 lbs per tire, or 6 ply 235-75-15's.
Marty