Oxygenics Shower Head

All good information. Thanks.

We use a rubber band to hold it in the clip when traveling. If you just lay it down, it will still bounce around. Did break one when it bounced out of the clip.

IAMICHABOD wrote:
This Is The One I bought 6 years ago and it one of the best mods I made,very happy with it.

Other than color (Mine is white) that's the one I have.

ONE THING; THe OEM shower head consumed 2 GPM
The Oxygenics.. Same 2 GPM

But it works so much better you are in teh shower for fewer M's So you use less G's (Gallons per minute)

Also on my Shower there was no cut off valve (The OXY comes with a cut off valve) so again Fewer G's

Isaac-1 wrote:
I have the cheap white plastic one https://www.amazon.com/dp/B00F5MUB66 though I did reuse my old hose as the one that came with the Oxygenics handheld seemed very cheaply made. The color matches my off white fiberglass shower fairly well.

I did the same, the Oxygenics works much better than the head that came with our TT.

Thanks to all of you. Think we'll go for the metal one.

What ever you end up with...you might want to take it out of its holder and lay it down when traveling. Was getting some parts and a guy in front of us was getting an estimate to fix or get a new shower tub. Seems it fell or bounced out when traveling and cracked the plastic tub. We have layed ours down since hearing that. We would buy again, good pressure compared to the normal type.

Body Spa

I have the cheap white plastic one https://www.amazon.com/dp/B00F5MUB66 though I did reuse my old hose as the one that came with the Oxygenics handheld seemed very cheaply made. The color matches my off white fiberglass shower fairly well.

some are plastic, the cheap one, and the other is made of metal

This Is The One I bought 6 years ago and it one of the best mods I made,very happy with it.