P2 Controller Issue
I purchased a P2 brake controller used off eBay. I have a question as to how it works when no trailer is attached. At first mine simply showed a screen with the 2 dots and would do nothing when the...
Forum Discussion
phipps33 wrote:gmw photos wrote:
From the prodigy manual:
NC means:
Power to Prodigy without trailer connected. Displays for 15
seconds then changes to: ( dot, dot )
Mine wasn't doing that when I pulled the camper up and then disconnected. Went through everything to make sure it wasn't a wiring issue and pulled the fuse to "reset" it.
Pulled the camper home today and when I disconnected it was showing the 2 dots by the time I got back to the cab and checked.
It seems to be working fine now. Not sure what it was, maybe just a glitch.
Thanks for the responses and info!
Yeah, you probably right, pulling the fuse caused it to do a hard reset and cleared things out.
Glad it's working right for you. I have been happy with mine, it works well for the three different trailers I pull with this truck.
