Questions on first toad set up
We recently purchased our first MH. A 2004 Itasca Suncruiser 33V on a workhorse chassis. We are now ready to purchase our first toad. We are looking at a used Jeep Liberty. How do I set it up to tow? ...
Forum Discussion
Bobbo wrote:
Blue Ox baseplate
Ready Brute Elite tow bar with built in surge brake
Brake lights for the car, either diodes or separate bulbs
This is the path I took with my Subaru 3 years ago. If doing it today, I would do nothing differently.
Queens Carriage wrote:
On my 2005 liberty the rear taillight lenses. The bottom red section isn't used, that makes it easy to use separate bulbs and wiring for your lighting system. Try E-trailer.com
Thanks everyone for the input. With the info provided from the helpful folks here and a little additional research I have opted for the Ready Brute Elite tow bar/braking sys., Blue Ox base plate and I bought a Blue Ox wiring kit which will allow me to use the empty red lens cell in the tail light assembly.
Now the fun starts. Parts arrive on Wednesday and install will ensue. Lots of info available and I plan on doing it all myself.
