We have a th that had 2 couches and no dinette. There is a table for one of the couches with the removable legs and the mounts that are in the floor of the r.v. We did not like the distance from table to couch so we removed the floor mounts and the table mounts that held the legs in place to the table and replaced it with a set of legs on each end of the table that fold up. We can store this table away when we don't use it as it is a fairly narrow table. Nowhere near as wide as a regular dinette table. We got the idea from seeing the legs on a table in a different trailer. We do have an island that we bought barstools to use at the counter for our table. After sometime in our th we missed having a table and chairs. We found a table and chairs at Fred Meyer that has small drop leafs on each side that were removable and therefore made it about the width of table we have seen in other trailers. We moved one couch to the garage of th and put the table and 4 chairs in its place. We love it and it was cheaper than what we had found for sale in R.V. stores. We did measure to make sure all would fit in the space we had to work with. We have not secured the table to the floor in any way and so far is riding great. Not too much room to wiggle around while driving as it is in the slide.