Recurve R6
Anyone with the Eaz-Lift Recurve R6? I have a family member about to pull the trigger on this hitch and we haven't really heard much about them. Any real time experience here?
Forum Discussion
Interesting design, like an upside down Equal-i-zer.
Looking at the installation guide, I see that the hook up brackets are fixed, so the only way to fine tune the bar tension is to change the angle of the hitch head. This requires loosening the head bolts, adjusting a large thumbscrew, then re-torquing the bolts to 260 ft lb. It also has the ability to turn off sway control with a hex key wrench.
The guide is here: Clicky
Looking at the installation guide, I see that the hook up brackets are fixed, so the only way to fine tune the bar tension is to change the angle of the hitch head. This requires loosening the head bolts, adjusting a large thumbscrew, then re-torquing the bolts to 260 ft lb. It also has the ability to turn off sway control with a hex key wrench.
The guide is here: Clicky
