Set Up WD Level?
I set up the WD for the new TV had to get a new shank to drop the head down. I followed the instructions and the measurement for the front fender measurement went from 35' to 35 1/4" the rear went fro...
Forum Discussion
e-light wrote:
See how it tows. If its pulling good dont worry about it. If you feel its not as stable as you like try adjusting the chain to add a little more weight to the back of your truck. Where you have it now or 1 link less hanging will prob be fine. My truck drives much better with more weight on the bumper.
I will say before adjusting the head you could for sure see that it was way high in front and towed like crap. It dolphin and seemed to sway left and right. After I did all this it towed good did not dolphin or sway. The looking at the frame to see if it appears level is difficult because of the frame see picture. I did measure the front and rear corner of the TT structure (not frame) and the rear was about 3/4 lower that the front.
