Sewer hose with just the bayonet end
My new Era Class B came with only a 6 foot dump hose. By the time it gets from the tank connection to the ground it has to be fully stretched to reach most dumping points and we know what that leads ...
Forum Discussion
Thanks for the suggestions. The "One Ended Stinky Slinky" is what I'm after but it had 4 extra nubs that I would have to cut off to fit into my 4" PVC tube end cap receiver. I guess they fit the Camco Wrench, but I would have to do more surgery on my storage tube to fit them in so it is easier to cut them off - that just means it has to wait until I am home.
jplant4 this is typical of a 4" PVC setup. It all fits in but the connectors which is why I want one with no fittings on one end. Once I added a coupler and threaded end cap receiver I could take a Dremmel tool and rout out two niches for the bayonet ears in the threaded end cap receiver and it seats nicely in the 4" PVC and a cap screws on.
It's starting to sound like this might have to wait until i get home.
Dave
jplant4 this is typical of a 4" PVC setup. It all fits in but the connectors which is why I want one with no fittings on one end. Once I added a coupler and threaded end cap receiver I could take a Dremmel tool and rout out two niches for the bayonet ears in the threaded end cap receiver and it seats nicely in the 4" PVC and a cap screws on.
It's starting to sound like this might have to wait until i get home.
Dave
