Slide topper/water accumulation
Who has the better solution to keeping water from accumulating on your slide toppers? I have tried successfully, inserting a couple boat fenders with a rope tied to them so I can remove them, but I...
Forum Discussion
downtheroad wrote:gijoecam wrote:
Dumb question: Is there any way to pitch the outboard end just like you would pitch the awning outside the door? Seems like maybe installing it a little off-kilter from the start might look weird, but would cause the water to flow off the preferred end just like the big awning...
Good thought, but problem is that the material would not roll up evenly if the tube were mounted, "off-kilter."
Agreed, but could you mount both the tube and the 'free end' (however it attaches to the body) off the same amount? The tube doesn't care if it's perfectly level or at an angle... As long as both the tube and the 'free end' of the awning were mounted 'off' the same amount (say three inches higher on one end) it wouldn't know any different (and should shed the water). I'm just not familiar with how they physically attach to the camper, that's all...
