Splendide 2100XC vent plugged/back flushed
Well, I found out my DW hasn't been getting the water level high enough when doing the "vent flush" on the washing machine. Had to wrestle the thing out of the closet to back flush the vent. Tight ...
Forum Discussion
Yes, that is what I meant by the "flush". She wasn't getting the water level high enough. The machine will not let it over fill itself. Once it gets about 2 inches above halfway on the glass, it drains back down to halfway on the glass.
I have a short "heated water hose" I pack along. I just hooked it up to the water supply for the washer and "flushed" that part out. It was plugged. That part filled up and spilled out a little. One hand on the hose, the other on the valve. I had to go on and off a few times to get it to clear. Works great again.
I have a short "heated water hose" I pack along. I just hooked it up to the water supply for the washer and "flushed" that part out. It was plugged. That part filled up and spilled out a little. One hand on the hose, the other on the valve. I had to go on and off a few times to get it to clear. Works great again.
