bob_b
Dec 03, 2022Explorer
Splendide dryer solution?
To all who have experienced shut-down during the drying cycle I have some info. Ours was caused by a buildup of damp lint in the dryer discharge passage. Not the flex vent hose but just inside the machine, about five inches down from where the hose attaches. I was able to extract the lint "balls" with a hook I bent from a section of wire coat hanger. It works fine now but I've been wondering why it happens.
It may be a design flaw, there is a sharp 90 degree bend the dryer air must make or, we may be the cause of the problem by the procedure we follow when drying. We have always pulled the clothes out while still damp and hung them to lessen wrinkles. This may allow the wet lint a chance to gather as opposed to drying and blowing out the vent hose. We are still removing our clothes but letting the dryer run to complete the cycle. Let's hope this works! Bob
It may be a design flaw, there is a sharp 90 degree bend the dryer air must make or, we may be the cause of the problem by the procedure we follow when drying. We have always pulled the clothes out while still damp and hung them to lessen wrinkles. This may allow the wet lint a chance to gather as opposed to drying and blowing out the vent hose. We are still removing our clothes but letting the dryer run to complete the cycle. Let's hope this works! Bob