Forum Discussion
mowermech
Sep 02, 2013Explorer
1. Using GOAL method (Get Out And Look), connect Towbar to motorhome hitch.
(My towbar, a fixed arm adjustable width unit, is always on the Jeep during the summer)
2. Connect safety chains
3. Connect light wiring
4. Start Jeep engine, put transfer case in Neutral
5. Put transmission in 6th gear, let clutch out. This verifies that transfer case is in Neutral.
6. Shut off engine, leave switch in "OFF, not locked" position, leave transmission in 6th gear
7. Verify operation of lights
8. get on down the road.
(My towbar, a fixed arm adjustable width unit, is always on the Jeep during the summer)
2. Connect safety chains
3. Connect light wiring
4. Start Jeep engine, put transfer case in Neutral
5. Put transmission in 6th gear, let clutch out. This verifies that transfer case is in Neutral.
6. Shut off engine, leave switch in "OFF, not locked" position, leave transmission in 6th gear
7. Verify operation of lights
8. get on down the road.
About RV Tips & Tricks
Looking for advice before your next adventure? Look no further.25,171 PostsLatest Activity: Oct 15, 2025