Toad tail light wiring

tlecronier wrote:
I have an DP that has separate brake lights and turn signals and my 2006 Honda Odyseey also has separate turn signals and brake lights. I have towed it flat for quite a while and I am tired of magnetic lights. I want to wire the Odyssey so the tail lights work with the DP. I have searched wiring kits and I am a little confused. Which type of kit do I really need? I do not care if the Odyssey's brake lights will now be the turn signals as well.

Thanks,
Todd

As I've explained many times before, here's another train of thought that doesn't involve the toad wiring at all. Install a hitch receiver on your toad if you don't already have one and then use a hitch hauler or just make up a bar for installing some LED lights with a connector towards and next to the hitch receiver. Wire a mate and run it to the front of the toad and to the connector used for the umbilical cord that connects it to the coach. Some may want to move their license plate to under the proper tail light and a quick change can be fashioned for that as well, if you intend to remove the thing when not towing. I like using the hitch haul the best, since it has many other uses and will double as a bike carrier as well. We wired one up, so as to use the towing connector as well, when not being towed by the coach, so that all the lights worked and just as if you were pulling a trailer with the toad, instead.