WD Hitch Set Up question
I am setting up my CURT Long Trunnion Bar Weight Distribution Hitch #17302 and the user manual says the rear and front bumper should settle within 1/2" of the unhitched position when setup correctly! ...
Forum Discussion
yukonpete wrote:
I am setting up my CURT Long Trunnion Bar Weight Distribution Hitch #17302 and the user manual says the rear and front bumper should settle within 1/2" of the unhitched position when setup correctly! My problem is I can't reach this number on my rear axle after many hours of trying. My front axle settles about 1/4" and the rear axle 1 1/14".
I have a 2012 F150 Supercab V8. Trailer weight is 6000 Lbs
While 1 1/2" is a lot for the rear to drop. IF you have the front back down. You are replacing the lost weight. You should be good. Take a test tow, and see how well it follows.
