W/D on 3/4 ton
Just curious if anyone uses or recommends w/d hitch for a 3/4 ton. My tonhgue weights is just around 900lbs give or take (havent weighed fully loaded just yet) Im coming from a tundra and used w/d on ...
Forum Discussion
ah64id wrote:Ivylog wrote:
If your 2500hd has a gas engine, then maybe. If it's a diesel you do not need more weight on the front axle. I would try it without and if you have a lot of porpoising then WD will help but you will have to adjust with more WD than you need to help the porpoising.
How does that matter? Spring rates are different and geometry still changes. The point is to get the weight back to where it was for suspension and steering, a diesel has the same issues as a gas engine.
Guess you have not weighed your diesel PU as they are heavy on the front. Any PU will handle better with some weight in the rear. The OP's 900 lbs will come close to balancing out the axle weights which will result in better handling than a empty PU so he does not need WD.
