Wrangler base plate

Yea idk it looks pretty strong.

Guess I will be the Guinea pig

Very similar to my set up. We tow with the Ready Brute system. No problems so far.

I'm towing a Wrangler with a three inch lift and 37" tires using a Blue Ox tow bar. The attachment point on the wrangler is a full 3 inches higher than the attachment point to the coach. I am getting quite a bit of sway with the jeep attached at 60 mph, is it possibly the angle of the towbar causing that? I already have a 12 inch raised receiver hitch piece on the motorhome to get it within 3 inches of the jeep height. Everything with the hitch is good and tight, there is no play in the receiver.

mike brez - keep us in the loop.

Shultzy, which bumper are you using?

It’s a Rock Hard receiver bumper. Needed a 2 inch receiver in the front for a Home Plow.

http://www.rockhard4x4.com/product_p/rh-5009.htm

Y-Guy wrote:
mike brez - keep us in the loop.

Shultzy, which bumper are you using?

Have pulled the wrangler around for a 100 miles or so with my pickup and seems fine.
Headed for Vermont tomorrow with the coach and wrangler in tow we will see.

Ok have about 1200 miles on pulling new to me jeep and bumper. Have gone up and down 6% grades,stop&ago traffic and a little city driving and everything works flawlessly
I give it a

mike brez wrote:
Just looked at the hard rock and LoD makes the one I posted look like a bargain.
I'm using $50.00 brackets now.

Again, where can I find them?

Sorry missed that :R
Not shure were I got them but it was from a jeep accessory dealer on the web.
I purchased them 14 years ago and they are awesome