3,500 pound Dexter axle bearing pre-load?
I'm putting a new drum-brake system on a single-axle cargo trailer. It has a torsion suspension. I have the components ready to go and one of the old, non-brake assemblies removed. It occurred to me, ...
Forum Discussion
I'll buy that. I never directly read the instructions myself.
Tightening to 50ft lbs, then back off to the 1st notch, would be WRONG.
Like was more or less said, the ONLY reason to ever torque to 50 lbs, would be to seat a race that had not seated correctly during installation.
Tightening to 50ft lbs, then back off to the 1st notch, would be WRONG.
Like was more or less said, the ONLY reason to ever torque to 50 lbs, would be to seat a race that had not seated correctly during installation.
