3d printers for making stuff for the RV
I have fallen down the worm hole of 3d printing since Christmas, and was wondering if anyone else on here is playing with them. If so, how you use them when it comes to RV's. I can see them being ...
Forum Discussion
I have made numerous items for my tow vehicle but not really for the RV's. I have made a few stereo bezels, a replacement tuner knob, a divider for the pocket in the dash to separate my phone from my readers. I do plan to try to create some corner pieces for my popup roof as they are no longer available.
Here's a few items.
New stereo in the tow vehicle made the rear audio controls obsolete. So I removed the controls and 3d printed a plate that now holds a USB outlet and an inverter powered 120v outlet.
The previous owner of my Bronco did a horrible job installing a stereo. So I had to custom print a new bezel to fit the new stereo and cover the hole.
But honestly the one item that I have created most often is "chip clips" to hold my potato chip bags closed.
Link
Here's a few items.
New stereo in the tow vehicle made the rear audio controls obsolete. So I removed the controls and 3d printed a plate that now holds a USB outlet and an inverter powered 120v outlet.
The previous owner of my Bronco did a horrible job installing a stereo. So I had to custom print a new bezel to fit the new stereo and cover the hole.
But honestly the one item that I have created most often is "chip clips" to hold my potato chip bags closed.
Link
