3d printers for making stuff for the RV
I have fallen down the worm hole of 3d printing since Christmas, and was wondering if anyone else on here is playing with them. If so, how you use them when it comes to RV's. I can see them being ...
Forum Discussion
2112 wrote:
I use to keep mine on a shelf and whatever was used last was left in the printer. We live on the Texas Gulf Coast. 90% humidity and 99°F is a way of life. I keep my filament sealed in a vacuum bag now.
I'm sure the 0.4mm nozzle we're using now would measure 0.5 or more. Wood and CF eat them up. I haven't changed nozzles in a few years. The only reason I did then was because I upgraded my hot end to go above 250C. My original hot end had a Teflon heat break limited to 250C.
your doing CF on brass? that nozzle is prolly making its way to 1mm by now lol.
I had a bad clog yesterday, I had my printer flying and it was bad.
Just got some cardboard spools, not remotely a fan, the filament looks significantly dirtier.
