Ac not cycling.
I have a 2014 Big Country with 2 15 k AC's. The bedroom unit works fine and we use it during the day mostly. The living room AC is the one giving us problems. It is set to auto and comes on fine and b...
Forum Discussion
This does a reset: (assumes single zone square thermostat)
System Initialization
A system initialization will need to be performed by the installer after
the system is installed.
• Make sure the Single Zone LCD thermostat is in the Off condition.
See page 4, “Quick Reference To Control Buttons”.
• Press the “+” button and, while holding it, also press and hold
the On/Off Mode button for three seconds.
LCD will show - - . Press the On/Off Mode button again to turn system off.
This completes the initialization.
see manual page 3
Yes the capacitive touch looks different but functions the same as the old style with buttons.
If you have the old style with click buttons, I recommend the newer capacitive touch model.
System Initialization
A system initialization will need to be performed by the installer after
the system is installed.
• Make sure the Single Zone LCD thermostat is in the Off condition.
See page 4, “Quick Reference To Control Buttons”.
• Press the “+” button and, while holding it, also press and hold
the On/Off Mode button for three seconds.
LCD will show - - . Press the On/Off Mode button again to turn system off.
This completes the initialization.
see manual page 3
Yes the capacitive touch looks different but functions the same as the old style with buttons.
If you have the old style with click buttons, I recommend the newer capacitive touch model.
