Amps Rising not tapering During Abs Charging?
Charging with the pm4b last evening, I brought the bank to 9.2a @ 14.64Vabs. Amps plateaued there early on during the 2 1/2 hour charge. It was getting late, so I shut things down for the night. To...
Forum Discussion
LOL, yep, it's all my fault!
Actually, sometime over the last couple of hours, the pm4b dropped down to float voltage, again. It never use to do that; even at (seemingly) deeper charges. hmmm. I'm wondering if it's on a timer?
Bank is now at 4.4a @14.15v. I'll let it sit a while before shutting things down. I'll take SG readings tomorrow.
And yes, I'll try doing a deep discharge, followed by a normal charge cycle. And perhaps I should do a proper Capacity test, before and after that cycle.
Actually, sometime over the last couple of hours, the pm4b dropped down to float voltage, again. It never use to do that; even at (seemingly) deeper charges. hmmm. I'm wondering if it's on a timer?
Bank is now at 4.4a @14.15v. I'll let it sit a while before shutting things down. I'll take SG readings tomorrow.
And yes, I'll try doing a deep discharge, followed by a normal charge cycle. And perhaps I should do a proper Capacity test, before and after that cycle.
