anode rod threads
The threads in my suburban water tank have gotten kind of corroded. I am putting a new anode rod in, but it will not turn in very far. The threads are not stripped, but need a good clean out. Does ...
Forum Discussion
There are two devices that are nearly identical.
One is called a "Thread chaser"
The other is a Tap
The Tap is designed to cut new threads in smooth metal it is thus somewhat more expensive.
What size: 1/2 inch Iron Pipe Thread.
One is called a "Thread chaser"
The other is a Tap
The Tap is designed to cut new threads in smooth metal it is thus somewhat more expensive.
What size: 1/2 inch Iron Pipe Thread.
