Atwood 8535 IV DCLP burner cycles endlessly
The furnace is an Atwood 8535-IV DCLP. The problem…..blower starts as it should. Burner lights and burns for 2 or 3 seconds then shuts down. This goes on endlessly. It DOES NOT lock out after 3 att...
Forum Discussion
'Limiting'
A condition caused by over-heating the Limit Switch.
The burner turns on and off during a heating cycle
Can be caused by:
Restricted ducting
Obstructed return air
Defective 'Limit Switch' (L190 temp disc)
Vent ...... S/B held in place by a 'wing nut'
A condition caused by over-heating the Limit Switch.
The burner turns on and off during a heating cycle
Can be caused by:
Restricted ducting
Obstructed return air
Defective 'Limit Switch' (L190 temp disc)
Vent ...... S/B held in place by a 'wing nut'
