ScottG wrote:
It's a bit of a shot to our ego but I've learned to always check the last thing I touched before doing anything else.
If you did connect backwards, your converters reverse polarity fuses will be blown too.
Very good. It seems a LOT of complaints occur AFTER the RV'er has changed the batteries. So, as you stated, go back to what you last did and check the battery connections. Also, IF it turns out the batteries ARE connected correctly, disconnect 12 volt power to the refer or just disconnect the battery negative cable and make sure the unit is NOT plugged into 120 shore power for 30 minutes. That may reset the Refer control logic and it will start working.Doug