Atwood refridgerator power problem
This morning I went out and started my 2014 Atwood 0801 refrigerator on AC. I just set it on auto and went outside and was tinkering about for awhile. Later I unplugged the AC cord to start the fridge...
Forum Discussion
Well Old-Biscuit, I finally got back to this project and find 12v at the appropriate fuse holder and am getting 13+ volts on both ends of the holder not the fuse body. Also when I unplug the harness connector labeled "Control Panel" in the upper left corner of the circuit board I find good DC at all of the pins. I assume that is the power to wake up the control panel on the front of the fridge which still sits dark. No light in the food compartment and pushing the power button gets no reaction. I am suspicious that there is something amiss in that panel. I have not found a schematic for that board. Any idea if I would let the "smoke" out if I pulled that cover?
Have a look at this tech sheet and the last drawing shows the real layout of the components on my circuit board.
file:///C:/Users/Owner/OneDrive/Pictures/atwood%200801%20reefer.pdf
Have a look at this tech sheet and the last drawing shows the real layout of the components on my circuit board.
file:///C:/Users/Owner/OneDrive/Pictures/atwood%200801%20reefer.pdf
