best low light performance
Hi, Amorphous panels are clearly the best for low light performance--but are relatively speaking huge. Does any one know if Poly or Mono are better in low light?
Forum Discussion
The Uni-Solar efficiency increases with decreasing irradiance. It may go from 6% @ 1000W/m^2 to 8% @ 200W/m^2.
The Kyrocera panel efficiency decreases with decreasing irradiance from 12% to 11.5% (1000 vs. 200W/m^2).
Still, the Uni-Solar efficiency is poor at low irradiance. There's a reason they're no longer produced.
http://www.flexenergydelsol.com/wp-content/themes/energy_del_sol/pdfs/uni-solar-flat-roof-data.pdf
The Kyrocera panel efficiency decreases with decreasing irradiance from 12% to 11.5% (1000 vs. 200W/m^2).
Still, the Uni-Solar efficiency is poor at low irradiance. There's a reason they're no longer produced.
http://www.flexenergydelsol.com/wp-content/themes/energy_del_sol/pdfs/uni-solar-flat-roof-data.pdf
