Can a Shunt Go Bad?
My Trimetric meter is reading -0.1 amp, even with nothing but the sense wires connected to the load side of the shunt. All loads have been removed in the pictures below. It was actually reading -0...
Forum Discussion
That seems to have worked, Mex. :B
It’s back to displaying -0.0 with just the Trimetric meter drawing power from the battery.
I assume that since the minus sign is lit, it just doesn’t have enough digits to display the tiny bit of current being used by the Trimetric itself.
Thanks for all the help.
:):)
It’s back to displaying -0.0 with just the Trimetric meter drawing power from the battery.
I assume that since the minus sign is lit, it just doesn’t have enough digits to display the tiny bit of current being used by the Trimetric itself.
Thanks for all the help.
:):)
