CITY WATER CONNECTION DRIP?
When hooked to city water the fitting on the trailer where the hose connects has a slight drip. Tightening does not cure or help. I replaced this coupling a few years ago. Is there a simple fix i can do?
Forum Discussion
16 Replies
2oldman wrote:
or forget the hose and use your tank and pump.
Yep.- or forget the hose and use your tank and pump.
- all the above.. try some Teflon tape on the threads as well.
- Did you replace the rubber or plastic washer? They commonly get lost.
- Is it the hose? Do you have a pressure reducer?
- If you have a plastic inlet it may help to upgrade to a metal one.
